Description
Unlike other infusion pump testers, the IDA-5 has built-in automation allowing users to create custom test templates for quick, standardized testing of intravenous pump devices with minimal user intervention. This automation bundle includes Ansur software for comprehensive testing. Ensure your infusion pumps are tested accurately and quickly with the multi-channel IDA-5 infusion device analyzer. The IDA-5 infusion device analyzer is the best choice.
Key Features
- Integrated carrying handle and lightweight (2.7 lb) for easy portability
- Battery powered with up to 10 hours of continuous operation for on-the-go operation
- LCD touchscreen for ease of use
- Average and instantaneous flow measurement
- Occlusion pressure measurements to 45 psi
- Maximize accuracy with Autostart mode enabling unit to begin testing only when fluid is detected
- Compatible with a wide variety of infusion pumps
- Based on technology that is proven and trusted worldwide
- On-board memory allows test results storage instantly
- Hydrograph graphical software to control unit,display results and print results via PC
- Global sales, service and support
General specifications
Storage of Results
Test results stored for later viewing, printing or transfer to PC. Typical practical capacity: 100 tests
Power Down
The results of tests in progress will be saved in the case of accidental power down
Computer Control
The Product can be fully controlled from a PC using HydroGraph V3 software for IDA-1S
Battery Power
4 x Panasonic HHR210AB NiMh 2000 mAh batteries
Dimensions
30 cm x17 cm x 10 cm (12 in x 8 in x4 in)
Weight
~1.2 kg (2.7 lbs)
Safety
IEC 61010-1: Overvoltage category II, Pollution Degree 2
Electromagnetic Environment
IEC 61326-1: Basic
Emissions Classification
IEC CISPR 11: Group 1, Class A.Group 1 have intentionally generated and/or use conductively coupled radio-frequency energy which is necessary fpr the internal functioning of the equipment itself.
Class A equipment is suitable for use in nondomestic locations and/or directly connected to a low-voltage power supply network
FCC
CFR47: Class A Part 15 subpart B
Electromagnetic Compatibility
Applies to use in Korea only. Class A: Equipment (Industrial Broadcasting and Communication Equipment)¹
Altitude
0 m to 2000 m (0 ft to 6500 ft)
Temperature
- 15 ° C to 30 ° C (59 ° F to 86 ° F)
- -20 ° C to +40 ° C (-4 ° F to +104 ° F) when drained of all liquid
Humidity
10 % to 90 % non-condensing
Charger
Operating voltage range:
100V ac to 240V ac
Supply frequency:
50Hz / 60 Hz Supply power: <20 VA
